The latest update NetApp NS0-175 dump with PDF and VCE from Lead4Pass

netapp ns0-175 exam updated
This is the latest update of NetApp NS0-175 test questions and answers. You can take part in the free practice test on this site to test your abilities! To ensure that you successfully pass the NetApp NS0-175 exam, please visit the NetApp NS0-175 exam dump directly at https://www.leads4pass.com/ns0-175.html. If you are a novice, you can follow us for a long time! We will update the content for free throughout the year!

The Lead4Pass NetApp series contains complete exam content. If you want more other exam dumps, you can visit Lead4Pass NetApp: https://www.leads4pass.com/netapp.html

All official Netapp certification information:https://www.netapp.com/support-and-training/netapp-learning-services/certifications/

Next, you can participate in the NetApp NS0-175 online practice test, and the answer will be announced at the end of the article. We will also share the free NetApp NS0-175 exam PDF!

NetApp NS0-175 free online practice test

QUESTION 1

A customer has configured a FlexPod solution and is experiencing issues with connectivity from the Cisco Nexus
switches to the NetApp AFF controllers. The customer must verify connectivity using the FC protocol. What are two
ways to troubleshoot this problem? (Choose two.)

A. Use the WWNN
B. Use the WWPN
C. Use the FCID
D. Use Domain ID

QUESTION 2

A customer wants to replace their Cisco UCS 6248UP with the current Cisco UCS 6454. They are currently using six 16
Gbit uplinks per Fabric Interconnect for FC and do not want to change the speed and number of ports used. In this
scenario, what is the minimum number of unified ports that must be configured for FC for a comparable configuration?

A. 8
B. 6
C. 16
D. 12

Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/NetworkMgmt/4-0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_0100.html

QUESTION 3

A customer wants a low latency and high IOPS FlexPod solution and decides on an end-to-end NVMe design. In this
scenario, which three components are required to accomplish this task? (Choose three.)

A. NetApp FAS with a 32Gbps FC HBA
B. Cisco Application Policy Infrastructure Controller (APIC)
C. Cisco MDS Series switches
D. NetApp AFF with a 32Gbps FC HBA
E. Cisco UCS Virtual Interface Card (VIC) 1400 series

QUESTION 4

A customer wants a FlexPod solution that is designed for high-performance applications and that will support 32 Gbps
Fibre Channel block storage. In this scenario, which two components should you recommend to the customer? (Choose
two.)

A. NetApp AFF C190
B. NetApp AFF A800
C. Cisco Nexus 93180YC-FX
D. Cisco Nexus 9504

QUESTION 5

A customer has a FlexPod configuration that supports FC and uses Cisco MDS switches. The customer wants to add a
48-Port 32 Gbps Advanced Fibre Channel Switching blade to support both 32 Gbps FC and 32 Gbps NVMe-oF. In this
scenario, which Cisco switch is appropriate?

A. MDS 9250i
B. MDS 9706
C. MDS 9148S
D. MDS 9396S

QUESTION 6

You are designing a FlexPod solution with secure multitenancy for a company. Each department in the company wants
to use its own storage and to be integrated with Windows Active Directory. In this scenario, which three technologies
should be included in the design? (Choose three.)

A. IPspaces
B. NVMe
C. S3
D. CIFS
E. Storage Virtual Machine

QUESTION 7

In which two sources would you verify scale-out maximums for NetApp and Cisco UCS environments? (Choose two.)

A. Cisco Configurations Limits
B. Cisco UCS Hardware and Software Compatibility List
C. NetApp Hardware Universe
D. NetApp Interoperability Matrix

QUESTION 8

A partner wants to develop a FlexPod Datacenter solution for a customer that will use Cisco ACI.
In contrast to a FlexPod solution with NX-OS, which two additional requirements must be satisfied? (Choose two.)

A. Use two Cisco Application Policy Infrastructure Controllers (APICs)
B. Deploy the Cisco Nexus 900 Series Switches in a core-edge topology
C. Deploy the Cisco Nexus 900 Series Switches in a leaf-spine topology
D. Use three Cisco Application Policy Infrastructure Controllers (APICs)

QUESTION 9

Click the Exhibit button. Exhibit 1.

netapp ns0-175 exam questions q9
netapp ns0-175 exam questions q9-1
netapp ns0-175 exam questions q9-2

Referring to the exhibit, UCS Fabric Interconnect 6300-A fails as shown in Figure 1. Due to the storage LIF
configuration, after UCS Fabric Interconnect 6300-A is restored, traffic flows as shown in Figure 2. To enable this
capability, on which two UCS port types should storage VLANs be accessible? (Choose two.)

A. uplink ports
B. appliance ports
C. fabric ports
D. switch ports

Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/GettingStarted/3-2/b_UCSM_Getting_Started_Guide_3_2/b_UCSM_Getting_Started_Guide_3_2_chapter_010.pdf (8)

QUESTION 10

You have a FlexPod solution that consists of a NetApp AFF A800 storage system, a Cisco MDS 9148S switch, and a
Cisco UCS 6232 Fabric Interconnect. You want to upgrade NetApp ONTAP software on the AFF A800 to take
advantage of a new feature.
In this scenario, which three tools would enable you to verify if the upgrade would be performed safely? (Choose three.)

A. NetApp Interoperability Matrix Tool
B. Cisco Intersight
C. Cisco Data Center Network Manager
D. Cisco UCS Hardware and Software Compatibility List
E. NetApp Active IQ Upgrade Advisor

QUESTION 11

Which Cisco UCS Fabric Interconnect model has multiple 100 Gbps ports available for use?

A. Cisco UCS 6332
B. Cisco UCS 6324
C. Cisco UCS 6454
D. Cisco UCS 6332-16UP

Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series-bladeservers/6400-specsheet.pdf

QUESTION 12

You are sizing a FlexPod Virtual Desktop solution for a customer with 500 virtual desktops in a shared Remote Desktop
Services (RDS) topology. In this scenario, which Cisco best practice should you use?

A. You should avoid placing more than 20 users per physical host
B. You should avoid over-committing physical CPU resources for virtual machines
C. You should avoid changing the virtual host disk queue depth
D. You should avoid multiple vCPUs per individual virtual machine

Reference: https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/techpaper/View51_on_FlexPod_Desi
gn_Guide.pdf

QUESTION 13

A customer is deploying a FlexPod Datacenter and planning to boot from SAN each their UCS blades using the Fibre
Channel Protocol. In this scenario, which three actions would accomplish their objective? (Choose three.)

A. Use only a pair of Cisco Nexus 9318YC-FX switches
B. Create a group on the NetApp ONTAP storage system with the appropriate IQs
C. Use only a pair of Cisco Nexus 9336C-FX2 switches
D. Use a pair of Cisco MDS 9148T and a fair of Cisco 9336C-FX2 switches together
E. Create a group on the NetApp ONTAP storage system with the appropriate WWPNs

Publish the answer

Q1Q2Q3Q4Q5Q6Q7Q8Q9Q10Q11Q12Q13
BCACDEBCCBDEBDACABABCCBABE

NetApp NS0-175 exam PDF free sharing

Google Drive:https://drive.google.com/file/d/16wKMp06JdmKVUtLnS1lRZ4fxkOH33nmg/view?usp=sharing

Thank you for reading! NetApp NS0-175 free content is shared by Lead4Pass! To successfully pass the exam and obtain certification, please go directly to NetApp NS0-175 dumps https://www.leads4pass.com/ns0-175.html. Help you pass the first exam successfully! Like, please bookmark and share!

PS.Get More >> [ibm,lpi,scrum,netapp practice test] -> allexamalert.com