[2021] the latest update to Cisco 300-710 dumps and free sharing of exam practice questions from Lead4Pass

Cisco 300-710 exam ready here! Get the latest 300-710 exam exercise questions and exam dumps pdf for free! 100% pass the exam to select
the full Cisco 300-710 dumps: https://www.leads4pass.com/300-710.html the link to get VCE or PDF. All exam questions are updated!

Lead4pass offers the latest Cisco 300-710 Google Drive

[Latest updates] Free Cisco 300-710 dumps pdf download from Google Drive: https://drive.google.com/file/d/1NavqeC0JxIXROLfGmJiOxO-jPtaizRsl/

Examvcesoftware Exam Table of Contents:

latest updated Cisco 300-710 exam questions and answers

QUESTION 1
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2
switching between interfaces?
A. FlexConfig
B. BDI
C. SGT
D. IRB
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/Firepower_System_Release_Notes_Version_620/new_features_and_functionality.html

QUESTION 2
How many report templates does the Cisco Firepower Management Center support?
A. 20
B. 10
C. 5
D. unlimited
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guidev60/Working_with_Reports.html

QUESTION 3
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize
that you need to manually upload a MIB for the Cisco FMC. In which folder should you upload the MIB file?
A. /etc/sf/DCMIB.ALERT
B. /sf/etc/DCEALERT.MIB
C. /etc/sf/DCEALERT.MIB
D. system/etc/DCEALERT.MIB
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa-firepower
module-user-guide-v541/Intrusion-External-Responses.pdf

QUESTION 4
Which command is entered in the Cisco FMC CLI to generate a troubleshooting file?
A. show running-config
B. show tech-support chassis
C. system support diagnostic-cli
D. sudo sf_troubleshoot.pl
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technoteSourceFire-00.html

QUESTION 5
Which two actions can be used in an access control policy rule? (Choose two.)
A. Block with Reset
B. Monitor
C. Analyze
D. Discover
E. Block ALL
Correct Answer: AB
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa-firepowermodule-user-guide-v541/AC-Rules-Tuning-Overview.html#71854

QUESTION 6
Which two features of Cisco AMP for Endpoints allow for an uploaded file to be blocked? (Choose two.)
A. application blocking
B. simple custom detection
C. file repository
D. exclusions
E. application whitelisting
Correct Answer: AB

QUESTION 7
Which report template field format is available in Cisco FMC?
A. box lever chart
B. arrow chart
C. bar chart
D. benchmark chart
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guidev60/Working_with_Reports.html

QUESTION 8
What is the result of specifying of QoS rule that has a rate limit that is greater than the maximum throughput of an
interface?
A. The rate-limiting rule is disabled.
B. Matching traffic does not rate limited.
C. The system rate-limits all traffic.
D. The system repeatedly generates warnings.
Correct Answer: B
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guidev62/quality_of_service_qos.pdf

QUESTION 9
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
A. BGPv6
B. ECMP with up to three equal-cost paths across multiple interfaces
C. ECMP with up to three equal-cost paths across a single interface
D. BGPv4 in transparent firewall mode
E. BGPv4 with nonstop forwarding
Correct Answer: AC
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config-guidev601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000e

QUESTION 10
Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)
A. dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.
B. reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and
reputation, and file lists
C. network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and
origin/destination country
D. network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security
zones and origin/destination country
E. reputation-based objects, such as URL categories
Correct Answer: BC
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guidev62/reusable_objects.html#ID-2243-00000414

QUESTION 11
When do you need the file-size command option during troubleshooting with packet capture?
A. when capture packets are less than 16 MB
B. when capture packets are restricted from the secondary memory
C. when capture packets exceed 10 GB
D. when capture packets exceed 32 MB
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guidev62/troubleshooting_the_system.html

QUESTION 12
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?
A. Child domains can view but not edit dashboards that originate from an ancestor domain.
B. Child domains have access to only a limited set of widgets from ancestor domains.
C. Only the administrator of the top ancestor domain can view dashboards.
D. Child domains cannot view dashboards that originate from an ancestor domain.
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guidev60/Using_Dashboards.html

QUESTION 13
Within Cisco Firepower Management Center, where does a user add or modify widgets?
A. dashboard
B. reporting
C. context explorer
D. summary tool
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guidev60/Using_Dashboards.html

Lead4Pass Cisco Discount code 2021

Lead4pass shares the latest Cisco exam Discount code “Cisco“. Enter the Discount code to get a 15% Discount!

About lead4pass

Lead4Pass has 8 years of exam experience! A number of professional Cisco exam experts! Update exam questions throughout the year! The most complete exam questions and answers! The safest buying experience! The greatest free sharing of exam practice questions and answers!
Our goal is to help more people pass the Cisco exam! Exams are a part of life, but they are important!
In the study, you need to sum up the study! Trust Lead4Pass to help you pass the exam 100%!
why lead4pass

Summarize:

Examvcesoftware free to share Cisco 300-710 exam exercise questions, 300-710 pdf, 300-710 exam video! Lead4pass updated exam questions and answers throughout the year!
Make sure you pass the exam successfully. Select lead4Pass 300-710 to pass Cisco 300-710 exam “Securing Networks with Cisco Firepower (SNCF)“.

ps.

Latest update Lead4pass 300-710 exam dumps: https://www.leads4pass.com/300-710.html (82 Q&As)

[Latest updates] Free Cisco 300-710 Dumps pdf download from Google Drive: https://drive.google.com/file/d/1NavqeC0JxIXROLfGmJiOxO-jPtaizRsl/