Best way to pass the Cisco 300-180 exam – 100% free

What is the best way to pass the Cisco 300-180 exam? (First: Exam practice test, Second: Lead4pass Cisco expert.) You can get free Cisco CCNP Data Center 300-180 exam practice test questions here.
Or choose (416 Q&As). Study hard to pass the exam easily!

Cisco CCNP Data Center 300-180 Exam Video

Table of Contents:

Latest Cisco CCNP Data Center 300-180 google drive

[PDF] Free Cisco CCNP Data Center 300-180 pdf dumps download from Google Drive:

300-180 DCIT – Cisco:

This exam tests a candidate’s knowledge of troubleshooting Cisco data center infrastructure including:

  • Data network protocols
  • Network virtualization and automation
  • Application Centric Infrastructure (ACI)
  • Storage
  • Compute platforms
  • Management and operations

Latest updates Cisco 300-180 exam practice questions

A customer is configuring VSANs in a Cisco UCS domain. After configuring the VSANs 3840, 3841, and 3842 in FC end-
host mode, the customer sees that these VSANs are not operational and that Cisco UCS Manager is raising faults.
What is the cause of this problem?
A. VSANs 3840, 3841, and 3842 should be in the allowed list on the trunk to clear the fault.
B. VSANs 3840 to 4079 cannot be used in Fibre Channel end-host mode in a Cisco UCS domain.
C. The fabric interconnect needs to be configured in switching mode and the VSANs need to be allowed on the trunk.
D. Use the UCS CLI to clear the fault on the VSAN trunk to forward the VSANs with faults.
Correct Answer: B

Which statement is true about the show cfs merge status name command?
A. In a successful merge, all switches in the fabric are shown separately.
B. The command shows the complete Cisco Fabric Services region database.
C. The merge master is selected based on the highest sWWN in the fabric.
D. In a successful merge, all switches are shown in a local fabric.
Correct Answer: D

Which two actions do you need to take to configure jumbo frames on UCS Manager? (Choose two.)
A. Choose QoS Policy Jumbo, choose the LAN tab, and set the MTU value to 9000.
B. Choose QoS System Class, choose the LAN tab, and set the MTU value to 9000.
C. Choose LAN Uplinks Manager, choose the LAN tab, and set the MTU value to the uplinks VLANs to 9000.
D. Choose the vNIC, and on the Server Profile set the MTU value to 9000.
E. On the Admin tab, under Global Policy, enable Jumbo MTU Bytes.
F. Go the fabric interconnect on the Equipment tab, right-click the port, and set the MTU value to 9000.
Correct Answer: BD

Which two maintenance policy options can you use to specify when the Cisco UCS Manager deploys a service profile
change? (Choose two.)
A. when acknowledged by any user
B. immediately
C. on the next reboot
D. when acknowledged by a user with root privileges
E. when acknowledged by a user with administrator privileges
Correct Answer: BE

You successfully install VMware ESXi 5.0 U1 on a Cisco UCS B200 M3 server to a Fibre Channel LUN. When you
reboot the server, you see the message “Reboot and Select Proper Boot device or insert Boot Media in selected Boot
device and press a key.” What are the first two pieces of information you should gather to troubleshoot the boot failure?
(Choose two.)
A. Connect to the NX-OS shell via the CLI and run the show npv flogi-table command.
B. SSH to the MDS 9124 and run the show flogi database command.
C. Validate the boot target WWPN and LUN ID in the service profile.
D. Validate the correct source WWPN in the service profile vHBA definition.
E. Validate zoning for your WWPN on the Cisco MDS 9124.
F. Validate that the boot order indicates the vHBA as the first device.
G. Ensure LUN masking is correctly configured on the storage controller.
Correct Answer: CF

A customer has a Cisco UCS Center cluster. The customer configures LDAP as the AAA protocol and enables SSL for
LDAP. The LDAP authentication fails. Which issue is the cause of the failure?
A. The LDAP client passed an incorrect from the trustpoint.
B. The ca certificate is missing from the trustpoints.
C. The LDAP server limit that is set by an administrative authority was exceeded.
D. The LDAP time limit that is specified by either the client or the server was exceeded.
Correct Answer: B

Refer to the exhibit.lead4pass 300-180 exam question q7

You are configuring a Cisco APIC for access. Which task is being performed in the exhibit?
A. configuring APIC management EpG
B. creating the LDAP logjn domain
C. creating the LDAP provider
D. creating the LDAP provider group
Correct Answer: C

You are configuring a Cisco Nexus 9000 Series Switch. Which configuration can be implemented for VXLAN BGP
A. VXLAN BGP EVPN by using an NVE interface in a default VRF
B. RACLs on the Layer 3 uplinks for the VXLAN traffic
C. QoS classification for the VXLAN traffic on all of the interfaces
D. DHCP snooping on the VXLAN VLANs
Correct Answer: A

What can prevent you from adding an interface to a pre-existing port-channel on a CISCO Nexus N7K device?
A. The port-channel is In LACP passive mode
B. The interface already assigned to a different port-channel,
C. The interface has been allocated to a different VOC
D. no shutdown was issued on the interface.
Correct Answer: C

Which actions on a Cisco UCS Server can be performed under the Cisco IMC utilities? (Choose Four.)
A. export tech support information to a remote host
B. download a tech support file locally
C. reboot the Cisco IMC
D. recover a corrupt BIOS
E. install firmware updates
Correct Answer: ABCD

Storage VDC creation has failed. Which two steps should be taken before creating the storage VDC? (Choose two.)
A. Check that the F1 module has the FCoE license installed.
B. Check that the FCoE feature is enabled on the N7K.
C. Check that you have allocated the interfaces of the F module on the VDC.
D. Check that the network QoS non-drop policy is configured for FCoE traffic.
E. Check that the FCoE VLANs are allocated on the VDC.
F. Check that the M2 module has the FCoE license installed.
Correct Answer: BD

Which command output shows the interface assigned as the designated receiver of each VLAN?
A. show system vlan reserved
B. show vlan internal bd-info bd-to-vlan all-bd
C. show port internal info all
D. show platform software enm internal info vlandb all
Correct Answer: D

Two fabric interconnects fail during a Cisco UCS firmware upgrade. Drag and drop the recovery steps from the left into
the correct order on the right.
Select and Place:lead4pass 300-175 exam question q13

Correct Answer:

lead4pass 300-175 exam question q13-1

Related 300-180 Popular Exam resources

title pdf youtube Cisco lead4pass Lead4Pass Total Questions
Cisco CCNP Data Center lead4pass 300-180 dumps pdf lead4pass 300-180 youtube 300-180 DCIT – Cisco 470 Q&A
lead4pass 300-160 dumps pdf lead4pass 300-160youtube 300-160 DCID – Cisco 539 Q&A
lead4pass 300-165 dumps pdf lead4pass 300-165 youtube 300-165 DCII – Cisco 309 Q&A
lead4pass 300-170 dumps pdf lead4pass 300-170 youtube 300-170 DCVAI – Cisco 154 Q&A
lead4pass 300-175 dumps pdf lead4pass 300-175 youtube 300-175 DCUCI – Cisco 416 Q&A
    350-601 DCCOR – Cisco 350-601 pdf 60 Q&A
    300-615 DCIT – Cisco 300-615 pdf 60 Q&A
    300-620 DCACI – Cisco 300-620 pdf 60 Q&A
    300-625 DCSAN – Cisco 300-625 pdf 60 Q&A
    300-635 DCAUTO – Cisco 300-635 pdf 60 Q&A

Lead4Pass Year-round Discount Code

lead4pass coupon

What are the advantages of Lead4pass?

Lead4pass employs the most authoritative exam specialists from Cisco, Microsoft, CompTIA, IBM, EMC, etc.
We update exam data throughout the year. Highest pass rate! We have a large user base. We are an industry leader! Choose Lead4Pass to pass the exam with ease!

why lead4pass


It’s not easy to pass the Cisco 300-180 exam, but with accurate learning materials and proper practice,
you can crack the exam with excellent results. Lead4pass provides you with the most relevant learning materials that you can use to help you prepare.