[New Version 100% Pass] Helpful Cisco 210-250 Dumps PDF Training Resources And VCE Youtube Shared

Get the best Cisco CCNA Cyber Ops 210-250 dumps pdf training resources and dumps vce youtube update free demo. High quality Cisco CCNA Cyber Ops 210-250 dumps exam questions and answers free download from lead4pass. “Understanding Cisco Cybersecurity Fundamentals” is the name of Cisco CCNA Cyber Ops https://www.leads4pass.com/210-250.html exam dumps which covers all the knowledge points of the real Cisco exam. Latest Cisco CCNA Cyber Ops 210-250 dumps pdf practice materials and study guides free try, pass Cisco 210-250 exam test easily.

The best Cisco 210-250 dumps pdf training resources free download: https://drive.google.com/open?id=0B_7qiYkH83VRaF8zb0JFVmRVclU

The best Cisco 300-135 dumps pdf training resources free download: https://drive.google.com/open?id=0B_7qiYkH83VRS21DRS14UlZHNjg

Vendor: Cisco
Certifications: CCNA Cyber Ops
Exam Name: Understanding Cisco Cybersecurity Fundamentals
Exam Code: 210-250
Total Questions: 80 Q&As
210-250 dumps
QUESTION 1
Which statement indicates something that can cause an inbound PSTN call to an H.323 gateway that is configured in Cisco Unified Communications Manager to fail to ring an IP phone?
A. The gateway is not registered in Cisco Unified Communications Manager.
B. The gateway IP address that is configured in Cisco Unified Communications Manager does not match the IP address that is configured at the gateway in the h323-gateway voip bind srcaddr command.
C. The Cisco Unified Communications Manager does not have a matching route pattern to match the called number.
D. The gateway is missing the command allow-connections h323 to h323 under the voice service voip configuration.
Correct Answer: B

QUESTION 2
In a SAF deployment, the registration status looks correct and the learned patterns appear reachable, but calls are not routed. What is causing this issue?
A. network connection failure between the SAF Forwarder and Cisco Unified Communications Manager
B. network connection failure between the primary and backup SAF Forwarders
C. TCP connection failure with the primary SAF Forwarder
D. TCP connection failure with the backup SAF Forwarder
Correct Answer: A

QUESTION 3
Which two statements indicate something that can cause an IP phone to fail roaming when device mobility has been configured?
(Choose two.)
A. Device Mobility Mode is set to Off in the Cisco Unified Communications Manager service parameters while the device mobility configuration on the phone is set to default.
B. No device mobility groups have been configured.
C. No locations have been configured and assigned to the device pools.
D. No physical locations have been configured and assigned to the device pools.
E. No device mobility-related information settings were configured under the device pools.
Correct Answer: AD

QUESTION 4
You enabled Cisco Unified Mobile Connect for a user, but the user is unable to send calls to a mobile phone from the desk phone. 210-250 dumps What do you do to resolve the issue?
A. Restart the phone, and verify that the key is present.
B. Under User Management > User, make sure that the Mobility option is selected.
C. Make sure that the phone is subscribed to Extension Mobility.
D. Add the mobility key to the softkey template that the phone is currently using.
Correct Answer: D

QUESTION 5
Which statement is correct regarding Media Redundancy Protocol (MRP) in a ring of ProfiNET devices?
A. When a link fault is detected, MRP rings must converge in less than 100 milliseconds
B. MRP defines two device roles, Media Redundancy Master and Media Redundancy Client
C. MRP can support rings of up to 250 devices
D. MRP is only supported on network switches
Answer: B

QUESTION 6
Which statement is true concerning the data center access layer design?
A. The access layer in the data center is typically built at Layer 3, which allows for better sharing of services across multiple servers.
B. With Layer 2 access, the default gateway for the servers can be configured at the access or aggregation layer.
C. A dual-homing NIC requires a VLAN or trunk between the two access switches to support the dual IP addresses on the two server links to two separate switches.
D. The access layer is normally not required, as dual homing is standard from the servers to the aggregation layer.
Correct Answer: B

QUESTION 7
Which CLI command monitors ILS replication progress?
A. utils ils findxnode
B. utils ils show peer info
C. utils ils showpeerinfo
D. utils ils lookup
Correct Answer: C

QUESTION 8
VLAN 3 is not yet configured on your switch. What happens if you set the switchport access vlan 3 command in interface configuration mode?
A. The command is rejected.
B. The port turns amber.
C. The command is accepted and the respective VLAN is added to vlan.dat.
D. The command is accepted and you must configure the VLAN manually.
Correct Answer: C

QUESTION 9
A dynamically routed private line and a statically routed IPsec tunnel connect two offices. What routing configuration prefers the IPsec tunnel only in the event of a private line failure?
A. floating static entry
B. EIGRP variance
C. bandwidth metric
D. OSPF maximum paths
Correct Answer: A

QUESTION 10
Cisco Unified Mobile Connect has been enabled, but users are not able to switch an in-progress call from their mobile phone to their desk phone. 210-250 dumps You find out that the Resume softkey option does not appear on the desk phone after users hang up the call on their mobile phone. What do you do to resolve this issue?
A. Issue the progress_ind progress disable command in the gateway.
B. Issue the voice call disc-pi-off command in the gateway.
C. Enable mobile connect on the user profile.
D. Assign Resume softkey on the desk phone.
Correct Answer: B

QUESTION 11
When a user attempts to log out from Cisco Extension Mobility service by pressing the services button and selecting the Cisco Extension Mobility service, the user is not able to log out. What is causing this issue?
A. The Cisco Extension Mobility service has not been configured on the phone.
B. The user device profile is not subscribed to the Cisco Extension Mobility service.
C. The CTI service is not running.
D. The logout URL that is defined for the Cisco Extension Mobility service is incorrect or does not exist under the IP Phone Services configuration.
Correct Answer: B

QUESTION 12
During a business-to-business video call through the Cisco Expressway solution, the internal endpoint can call out to the remote endpoint on the Internet, but it does not receive audio or video. The remote endpoint receives both audio and video. What is causing the issue?
A. The Cisco Expressway does not have a Rich Media Session license.
B. The firewall is blocking SIP signaling.
C. The Cisco Unified Communications Manager is not configured for business-to-business calling.
D. The firewall is blocking inbound RTP ports.
E. The Advanced Networking option is not installed on the Expressway Edge.
Correct Answer: D

Read more: https://www.leads4pass.com/210-250.html dumps exam practice questions and answers free update, the best and most updated Cisco CCNA Cyber Ops 210-250 dumps pdf training materials.

Watch the latest Cisco 210-250 dumps vce youtube to learn more: https://youtu.be/YF5kWehwKzc