[New Version 100% Pass] Cisco CCNP Wireless 642-732 Dumps Exam Materials And Youtube Demo Free Shared
Are you ready for Cisco 642-732 exam test? Get the best useful Cisco CCNP Wireless 642-732 dumps exam questions and answers free download from lead4pass. Newest Cisco CCNP Wireless 642-732 dumps pdf files and vce youtube demo update free shared. “Conducting Cisco Unified Wireless Site Survey (CUWSS) v2.0” is the name of Cisco CCNP Wireless https://www.leads4pass.com/642-732.html exam dumps which covers all the knowledge points of the real Cisco exam. Latest Cisco CCNP Wireless 642-732 dumps pdf training materials and study guides update free try, pass Cisco 642-732 exam test easily at the first time.
Latest Cisco 642-732 dumps pdf materials free download: https://drive.google.com/open?id=10-vnCsAIXhyBS9k4-I-RFFH_wqmrBRXf
Latest Cisco 642-737 dumps pdf materials free download: https://drive.google.com/open?id=1HLwuo1hYBEalnSOYwaz-9t1m5R7mRpOq
QUESTION 1
A new client has contacted you to design a WLAN solution for a new 30-foot high-bay warehouse that will use high-lift electric forklifts. The warehouse is currently empty except for storage racks. The customer is planning to continue to use their existing wireless barcode scanners and also deploy wireless IP phones for communication. Which four issues do you need to consider prior to performing the site survey? (Choose four.)
A. Which protocol do the wireless barcode scanners and IP phones need to use?
B. What is the proximity to other warehouses?
C. Which types of goods will be stored in the warehouse and what is the expected average warehouse capacity?
D. Do any planned WLC locations exceed 100 meter cable distances?
E. Is there sufficient clearance between the roof and the top of the racks for placing APs?
F. What is the expected humidity level in the warehouse on average during the year?
G. Are there any secure enclosures that use chain-link fence that will require wireless access?
Correct Answer: ACEG
QUESTION 2
What is the result of a Cisco 1250 AP deployed for 802.11a/b/g/n using optimized power (16.8 W) with software version 7.0?
A. One spatial stream per radio
B. One spatial stream on 2.4 GHz and two spatial streams on 5 GHz
C. One spatial steam on 5 GHz and two spatial streams on 2.4 GHz
D. Reduced power on both radios
E. Reduced power on 2.4 GHz radio only
F. Reduced power on 5 GHz radio only
Correct Answer: E
QUESTION 3
Which wireless tool would be most useful in planning a WLAN solution prior to performing a site survey?
A. Ekahau Survey
B. Air Magnet Survey
C. Air Magnet Wi-Fi Analyzer
D. Cisco Spectrum Expert
E. Cisco WCS
Correct Answer: E
QUESTION 4
Refer to the exhibit.
After performing a Layer 1 survey using Cisco Spectrum Expert, what is the result indicated by the visual screen? 642-732 dumps
A. Normal 802.11g activity
B. Microwave oven interference
C. Video camera interference
D. Bluetooth device interference
E. RF jammer
Correct Answer: C
QUESTION 5
Select and Place:
Correct Answer:
QUESTION 6
Which two types of information should be included in the installation inventory portion of the postinstallation report?(Choose two.)
A. All AP, controller, and MSE administrator credentials
B. The number and type of all WLAN clients and tags
C. The names, locations, IP addresses, MAC addresses, etc. for every AP, controller, and MSE in the WLAN
D. Results of the coverage audit performed with the site survey mapping tool
Correct Answer: AC
QUESTION 7
A customer has requested site surveys for data, voice, video, and location services for their location. The customer will be using RFID tags extensively. Which type of site survey should be conducted?
A. data
B. voice
C. video
D. location-based services
E. bridging
F. multi-survey
Correct Answer: D
QUESTION 8
An engineer is performing a site survey for a 5 GHz mesh wireless network. The customer requires 300 Mbps data rates per radio, 2×3 MIMO technology, and legacy beamforming.
What Cisco access point should be recommended?
A. 1510
B. 1522
C. 1524
D. 1552
Correct Answer: D
QUESTION 9
Refer to the exhibit.
After performing a Layer 1 survey using Cisco Spectrum Expert, what is the result indicated by the visual screen? 642-732 dumps
A. Normal 802.11b activity
B. Normal 802.11g activity
C. Microwave oven interference
D. Video camera interference
E. Bluetooth device interference
Correct Answer: E
QUESTION 10
An engineer wants to provide coverage between warehouse shelving stocked with bulk metal materials.
What antenna would be adequate for performing this survey?
A. 5.5 dBi omni down tilt
B. 17 dBi grid
C. 2.2 dBi omni
D. 8.5 dBi patch
Correct Answer: D
QUESTION 11
What is a typical attenuation value for a cinder block wall?
A. 3dB
B. 4dB
C. 6dB
D. 12dB
Correct Answer: B
QUESTION 12
A Cisco engineer is troubleshooting a Cisco 1250 series 802.11n access point with a maximum throughput on 2.4 GHz that is limited to 72 Mbps. Why might the AP be operating in a limited capacity?
A. the switch providing PoE supports 802.3af
B. the switch providing PoE supports 802.3at
C. the 2.4 GHz bandwidth is 20 MHz wide
D. the 2.4 GHz is 40 MHz wide
Correct Answer: A
QUESTION 13
What RF phenomenon results from a presence of metallic I-beams, conveyor belts, chain- link fences, and metallic shelves found in a warehousing environment?
A. multipath
B. free path loss
C. absorption
D. scattering
Correct Answer: A
QUESTION 14
An engineer is planning for a 24 Mbps data rate for a new installation. If the environment and other factors are not taken into consideration, what is the coverage area from the AP?
A. 40 feet
B. 80 feet
C. 100 feet
D. 150 feet
E. 225 feet
Correct Answer: B
QUESTION 15
What two tools can an engineer use to verify RF data rates and coverage after installation? (Choose two.)
A. Cisco WCS Planning Mode
B. Cisco WCS Location Readiness Tool
C. Cisco WCS Voice Audit Report
D. AirMagnet Passive Survey Mode
E. AirMagnet Active Survey Mode
F. AirMagnet Planner Mode
Correct Answer: DE
QUESTION 16
Which two are impacts of having 802.11b clients in an 802.11g network? 642-732 dumps (Choose two.)
A. 802.11b clients will degrade throughput of 802.11g clients
B. 802.11b is more susceptible to multipath than 802.11g
C. 802.11b operates over fewer channels than 802.11g
D. 802.11b uses 20 MHz wide channels, 802.11g uses 40 MHz wide channels
E. 802.11b is more susceptible to attenuation than 802.11g
Correct Answer: AB
QUESTION 17
Which hop count is Cisco’s maximum recommended for a client in a wireless Mesh network?
A. 2
B. 4
C. 6
D. 8
Correct Answer: B
QUESTION 18
In an outdoor mesh environment, which is the purpose of deploying one of the access points relatively higher than the others?
A. The MAPs need to be mounted higher than the first hop RAPs so that the mesh units can accomplish radio line of sight.
B. Elevated MAPs are connected to the switches, providing better bandwidth that all the RAPs utilize for client connectivity.
C. An AP deployed as a RAP needs to be mounted in a higher elevation to provide clear connectivity to first hop MAPs.
D. Root APs need clear line of sight to provide the best bandwidth to all of its RAPs, so the higher the better.
Correct Answer: C
QUESTION 19
An engineer is conducting a site calibration using Cisco WCS. The current network has 802.11a, 802.11b, 802.11g, and 802.11n devices. How many times should the calibration be done?
A. once for each band
B. once for each protocol
C. once per deployment
D. once using each data collection type
Correct Answer: A
QUESTION 20
An engineer notes that some areas of a floor fail when using the Location Readiness Tool in Cisco WCS.
What criteria must be met for a point to be considered location ready?
A. one AP in each quadrant, with three less than 70 feet away
B. one AP in three quadrants, with two less than 70 feet away
C. one AP in each quadrant, with two less than 70 feet away
D. one AP in three quadrants, with one less than 70 feet away
Correct Answer: A
The best and most updated latest Cisco CCNP Wireless 642-732 dumps exam practice files in PDF format free download from lead4pass. High quality Cisco CCNP Wireless https://www.leads4pass.com/642-732.html dumps pdf training resources which are the best for clearing 642-732 exam test, and to get certified by Cisco CCNP Wireless, download one of the many PDF readers that are available for free.
High quality Cisco CCNP Wireless 642-732 dumps vce youtube: https://youtu.be/EiDnq_VYWCE